Anytone At5555n Ii Service Menu Work -

Pc-H (High power SSB limit)

However, even the best factory-produced radios have tolerances. Over time, or immediately after purchase, you might notice that your transmitted frequency is off by 50 Hz, your AM carrier is too high, or your SSB output power seems low. This is where the hidden becomes your best friend. anytone at5555n ii service menu work

| Parameter | Function | Typical Range | When to Adjust | | :--- | :--- | :--- | :--- | | | Reference Frequency (PLL Master Clock) | 0 to 255 | Most common fix. Adjusts the master oscillator. | | PA-H | High Power AM/FM Bias | 0-255 | Sets final transistor bias for high power. | | PA-L | Low Power AM/FM Bias | 0-255 | Sets final transistor bias for low power. | | Pc-H | SSB High Power ALC Threshold | 0-255 | Limits peak envelope power on SSB. | | Pc-L | SSB Low Power ALC Threshold | 0-255 | Limits low power SSB. | | Mod | AM Modulation Depth Limit | 0-255 | Maximum AM percentage (Factory ~95%). | | S-1 through S-9 | S-Meter Calibration | Varies | Adjusts receive signal strength reading. | The Most Important Parameter: rEF (Frequency Calibration) The most common reason for entering the service menu is drifting off frequency. A fellow ham says, "You are 60 Hz low on 27.555 MHz." Pc-H (High power SSB limit) However, even the

If you don't own a frequency counter or a Bird wattmeter, do not open the service menu. Instead, send the radio to a reputable tech. The cost of calibration ($50-$80) is far less than the cost of a new AT-5555N II ($300+). | Parameter | Function | Typical Range |

If you own an Anytone AT-5555N II , you already know it is a powerhouse in the world of 10-meter and 12-meter amateur radio, as well as a favorite among freebanders. This radio is celebrated for its robust build, excellent receiver sensitivity, and the famous "N2" firmware improvements over its predecessor.

Pc-H (High power SSB limit)

However, even the best factory-produced radios have tolerances. Over time, or immediately after purchase, you might notice that your transmitted frequency is off by 50 Hz, your AM carrier is too high, or your SSB output power seems low. This is where the hidden becomes your best friend.

| Parameter | Function | Typical Range | When to Adjust | | :--- | :--- | :--- | :--- | | | Reference Frequency (PLL Master Clock) | 0 to 255 | Most common fix. Adjusts the master oscillator. | | PA-H | High Power AM/FM Bias | 0-255 | Sets final transistor bias for high power. | | PA-L | Low Power AM/FM Bias | 0-255 | Sets final transistor bias for low power. | | Pc-H | SSB High Power ALC Threshold | 0-255 | Limits peak envelope power on SSB. | | Pc-L | SSB Low Power ALC Threshold | 0-255 | Limits low power SSB. | | Mod | AM Modulation Depth Limit | 0-255 | Maximum AM percentage (Factory ~95%). | | S-1 through S-9 | S-Meter Calibration | Varies | Adjusts receive signal strength reading. | The Most Important Parameter: rEF (Frequency Calibration) The most common reason for entering the service menu is drifting off frequency. A fellow ham says, "You are 60 Hz low on 27.555 MHz."

If you don't own a frequency counter or a Bird wattmeter, do not open the service menu. Instead, send the radio to a reputable tech. The cost of calibration ($50-$80) is far less than the cost of a new AT-5555N II ($300+).

If you own an Anytone AT-5555N II , you already know it is a powerhouse in the world of 10-meter and 12-meter amateur radio, as well as a favorite among freebanders. This radio is celebrated for its robust build, excellent receiver sensitivity, and the famous "N2" firmware improvements over its predecessor.