Ttl Models Carina Zapata 002 Install -

Spray Mr. Surfacer 1200 or Stynylrez primer in thin, dusting layers. Inspect under raking light (light held at a low angle). Any seam, scratch, or dent will become painfully obvious.

Drill two 2mm holes 20mm apart into the bottom of the torso. Drill matching holes into the resin base. Use two brass rods as alignment pegs. This also allows you to paint the bust and base separately. Step 5: Gap Filling – Achieving the Seamless Look Despite perfect pinning, TTL Models kits often have microscopic gaps at joints. Fill them before the final glue-up. ttl models carina zapata 002 install

Submerge all resin parts in warm (not hot) soapy water with a degreaser like Simple Green or Dawn dish soap. Use an old toothbrush to scrub every surface. Residue from the mold release agent will cause paint to fisheye and glue to fail. Rinse thoroughly and air dry for 24 hours. Spray Mr

Now, mount that bust on a turntable, load your airbrush, and bring Carina Zapata to life. ttl models carina zapata 002 install, resin bust assembly, pinning resin figures, gap filling for garage kits, TTL Models build guide. Any seam, scratch, or dent will become painfully obvious